New ACI Motor AMP Draws
| No Load amps |
Low Load amps |
High Load amps |
Stall amps |
| 3 |
5 |
11 |
20 |
ACI Motors are Reverse Polarity
This means that the ground for the system must come out of the master switch. There are 2 poles on the motor – to make it operate,
you must put power to one side then ground to the other side – NOT to the motor case. This will result in the motor turning in one direction.
By swapping the wires from side to side, the direction will change.
Fuses or Circuit Breakers – 30 AMP
Most of our harnesses will come with an in-line 30 AMP fuse. If you prefer, a circuit breaker will work too.
You can hook your windows up to a varity of different power sources.
Some options are:Â Straight to the battery (Windows should not have any battery draw when not in use).
 Find extra slot in fuse panel – tie in using the supplied fuse.
 Pull power from the key-on side of the switch
Relays
In most cases, you will not need to use a relay to boost amperage to the motors. The switches and wiring we use can handle the amp draws.
If you are using old style 3 pole switches, a special relay is needed to reverse the polarity at the motor. These do not increase amperage,
they just swap the ground from side to side. we have these available (prewired). Call us at 336-699-8949Â for assistance.
