Description
Digital Gauges |
|
Speedometer |
Ā·0 -255 MPH (optional metric version 0- 255 km/h) |
|
Tachometer |
Ā·0- 17,500 RPM |
|
Oil Pressure |
Ā·0- 99 psi |
|
Water Temperature |
Ā·0- 300ĀŗF (optional metric version 0- 150ĀŗC) |
|
Fuel Level |
Ā·0- 99% |
|
Voltmeter |
Ā·8- 17 VDC |
|
Standard Colors |
Ā·Blue or Teal |
|
Digital Message Centers |
|
Standard Displays |
Ā·Odometer (One time user settable,Ā Million Mile) |
Ā·Dual (A/B) Trip Meter (0- 9,999.9) |
|
Performance Meters |
Ā·0- 60 MPH Timer (0- 100 kmh) |
Ā·1/4 mile time |
Ā·1/4 mile end speed (trap speed) |
Ā·High speed recall |
Ā·High RPM recall |
|
Gauges |
Ā·Speedometer (0- 255 MPH/kmh) opposite scale of main speedometer. |
|
Built-in Indicators |
|
Indicators |
Ā·Turn Signals (Left/ Right) |
Ā·High Beam |
Ā·Check Engine |
Ā·Parking Brake |
Ā·Cruise Control (On/ On & Engaged when vehicle is equipped) |
Ā·Gear Position (OptionalĀ GSS-3000Ā sensor required) |
Ā·4 x 4 (When vehicle is equipped) |
Ā·Wait to Start (When vehicle is equipped) |
Ā **Not all OEM indicator lamp functions will be replaced.
|
|
Included Sensors |

|
Water Temperature |
1/8″ NPT, ground isolated sensor with aĀ 10 ftĀ harness. |
|
Oil Pressure |
1/8″ NPT solid state sensor with a 10 ft harness. |
|
Cable Driven Speed Sensor/ Generator |
Replaces GMĀ style speedometer cables with a 10 ft harness. Sensor requires approximately 5″ clearance extending between the cable drive output and any obstruction. Part #Ā 130011Ā (sold separately) allows for relocation of the pulse generator when additional clearance is required.Ā (Tremec and Ford style adaptors available on request.) |
|
Bushings |
Each kit comes with 1/8″ toĀ 1/4″, 3/8″ and 1/2″ NPT bushingsĀ along with bushings forĀ 12mm and 16mmĀ x 1.5 threads. |
|
Control Box Dimensions |
5.5″ x 3.5″x 1″ |
|
Calibration |
|
Pushbutton |
Dakota DigitalĀ instrumentsĀ are programmed and operated by the push of a button. Simply mount the included pushbuttonsĀ supplied with yourĀ gaugesĀ inĀ a convenientĀ and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count andĀ theĀ fuel levelĀ gauge. Once properly configuredĀ these same buttons are used to access the wealth of informationĀ located in the Digital Message Centers. |